94 detailed settings for each function ([edit]), Factory reset current, Factory reset all – Roland RD-700 User Manual
Page 94
94
Detailed Settings for Each Function ([EDIT])
Edit Mode
Restoring the settings to the
factory condition (Factory Reset)
The settings stored in the RD-700 can be returned to their
factory settings.
NOTE
Executing “Factory Reset All” results in deletion of the
Setups (p. 54). If you want to keep any data you have stored,
use the “Bulk Dump SETUP” operation to save the data to an
external sequencer (p. 92).
1.
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.Editmenu2.eps_150
2.
Press CURSOR [
] to select “9.Utility.”
3.
Press CURSOR [
] to display the Edit screen.
fig.utility1.eps_150
4.
Press CURSOR [
] or [
] to select “Factory Reset
Current” or “Factory Reset All.”
NOTE
While the Factory Reset is in progress, no sounds are
produced even when the keys are pressed. In addition,
Rhythms and arpeggios being played are also stopped.
Factory Reset Current
5.
Press CURSOR [
].
A screen like the one shown below appears.
fig.LCD
6.
Press [INC/YES].
The confirmation message appears.
fig.LCD
To cancel the Factory Reset, press [DEC/NO].
7.
Press [INC/YES] once again to start the Factory Reset
operation.
NOTE
Never turn off the power during Factory Reset (while “Now,
Executing” appears in the display).
8.
After the Factory Reset operation is finished, the display
will indicate “COMPLETED.”
The Tone screen returns to the display.
Factory Reset All
5
Press CURSOR [
].
A screen like the one shown below appears.
fig.LCD
6.
Press [INC/YES].
The confirmation message appears.
fig.LCD
To cancel the Factory Reset, press [DEC/NO].
7.
Press [INC/YES] once again to start the Factory Reset
operation.
NOTE
Never turn off the power during Factory Reset (while “Now,
Executing” appears in the display).
8.
After the Factory Reset operation is finished, the display
will indicate “COMPLETED.”
The Tone screen returns to the display.
Parameter
Value
Factory Reset
Current
The currently selected Setup returned to
their factory settings.
Factory Reset
All
The settings stored in the RD-700 can be
returned to their factory settings.
RD-700_e.book 94 ページ ２００３年１０月２３日 木曜日 午後４時５９分