Roland RD-700 - Manual (Page 22)

22
Getting Ready
Getting Ready
Connecting the RD-700 to External
Equipment
The RD-700 is not equipped with an amplifier or speakers. In order to
produce sound, you need to hook up audio equipment such as a monitor
speaker or a stereo set, or use headphones.
* Audio cables, MIDI cables, headphones, and expression pedals are not included.
Consult your Roland dealer if you need to purchase accessories such as these.
fig.00-05.e
1
Before you begin making connections, confirm the following.
Is the volume level of the RD-700 or connected amp turned all the way
down?
Is the power to the RD-700 or connected amp turned off?
NOTE
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
Stereo
headphones
Monitor speakers
(powered)
Power amp.
Mixer etc.
MIDI IN
MIDI sound module etc.
MIDI OUT
MIDI sequencer etc.
to Power outlet
Expression pedal (EV-5)
or Pedal switch
Pedal switch
(DP-2, DP-6 etc.)
Roland
RD-700_e.book 22 ページ ２００３年１０月２３日 木曜日 午後４時５９分