Roland RD-700 - Manual (Page 88)

88
Detailed Settings for Each Function ([EDIT])
Edit Mode
6. When you have finished making the settings, press
[EDIT], extinguishing its indicator.
You are returned to the Tone screen.
Selecting the Part to Be Set
(<Local Part>)
Choose the Local Part for which you want to make settings.
You can select the Local part by using the PART SELECT
buttons.
Setting the Key Range for Each
Part (Key Range)
When [SPLIT] is pressed in normal performance conditions,
the key range is divided at the Split Point, and you can play
with two different tones on one keyboard.
Using Key Range allows you to make even more detailed key
range settings.
This sets the lower and upper limit of the key range in each
part.
After moving the cursor to the parameter to be set, you can
make the setting by pressing the designated key and
[ENTER].
NOTE
This is effective only when [SPLIT] is on (p. 43) in the key
range settings.
NOTE
You cannot set the key range’s lower limit higher than the
upper limit, nor can you set the upper limit below the lower
limit.
Setting the Change in Volume
According to the Force Used to
Play the Keyboard
(Velocity Sens/Max)
This setting determines how the volume changes in response
to the force used to play the keyboard (velocity) and the
maximum value of the change.
NOTE
This setting is disregarded with certain tones.
Setting the Transposition for Each
Individual Part (Key Transpose)
You can perform with each part transposed to a different
pitch.
When the Keyboard Mode is Layer, you can create a richer
sound by setting the two Tones to different octaves. Also, if
the Keyboard Mode is set to Split and you are playing a bass
Tone in the lower Part, you can use the Key Shift function to
play the bass at a lower pitch.
You can also set the same degree of transposition for all parts
with [Transpose]. For details, refer to
“Transposing the Key
of the Keyboard ([TRANSPOSE])” (p. 46).
Parameter Value
<Local Part> UPPER1, UPPER2, LOWER
Parameter Value
Key Range A0–C8
Parameter Value Description
Velocity Sens
-63–
+63
This setting determines how
the volume changes in re-
sponse to the velocity. The
volume is increased as the
keyboard is played with
greater force when a positive
Value is used; when a nega-
tive value is selected, the vol-
ume decreases as the keys are
played with greater force. If
this is set to “0,” the volume
will not be affected by the
strength of your playing on
the keyboard.
Velocity Max 1–127
This is the maximum value
for the change in volume oc-
curring in response to the ve-
locity. Lowering this value
will produce softer notes
even if you play the key-
board strongly.
Parameter Value
Key Transpose -48–0–+48
RD-700_e.book 88 ページ ２００３年１０月２３日 木曜日 午後４時５９分