Roland RD-700 - Manual (Page 69)

69
Detailed Settings for Each Function ([EDIT])
Edit Mode
Setting Parameters
fig.Q5-01
Making System Settings (System)
Functions that affect the RD-700’s overall operating
environment are called “System functions.”
How to Make Settings
1. Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.Editmenu1.eps
2. Press CURSOR [ ] to select “0.System.”
3. Press CURSOR [ ] to display the Edit screen.
fig.Editmenu1.eps
fig.system1.eps_150
fig.system2.eps_150
4. Press CURSOR [ ] or [ ] to switch screens, and press
CURSOR [ ] or [ ] to move the cursor to the
parameter to be set.
5. Press [INC/YES] or [DEC/NO] to set the value.
6. When you have finished making the settings, press
[EDIT], extinguishing its indicator.
When you exit Edit mode, the changed System settings
are stored to the RD-700.
You are returned to the Tone screen.
Settings for system functions are saved in the RD-700
whenever a change is made to their parameters. These
settings are not deleted even when the power is turned off.
For more on the following system function parameters, refer
to the corresponding pages.
Master Tune ➔ p. 29 LCD Contrast ➔ p. 28
Edit Menu Screen
Edit Screen
Select a menu
Select an item
Switch screens
Change the value
(The number of Edit screen
pages may vary according
to the menu selected.)
:
Getting [EDIT]
indicator light
Extinguishing
[EDIT] indicator
Exit the Edit Mode
Enter the Edit Mode
You can input the value using
the TONE SELECT buttons, and
press [ENTER] to set the value.
RD-700_e.book 69 ページ ２００３年１０月２３日 木曜日 午後４時５９分