Roland RD-700 - Manual (Page 57)

57
Using the Convenient Functions in Performances
Convenient Functions
5
Press CURSOR [ ]/[ ] to move the cursor to the positions
where the characters are to be input.
6
Press [INC/YES] or [DEC/NO] to enter the characters.
The following characters are available.
Space, A–Z, a–z, 0–9, ! “ # $ % & ‘ ( ) * +, - . / ; : < = > ? @ [ ¥ ] ^ _ ` { | }
When EXPANSION [A] is pressed, a single-character blank space is
inserted; pressing EXPANSION [B] deletes one character.
7
Repeat steps 5–6 to input the name.
Pressing CURSOR [ ], even while inputting the name, moves the cursor
to the save-destination Setup number.
8
When you have finished determining the save destination and
the name for the new Setup, press CURSOR [
] to move the
cursor to the confirmation message.
The [INC/YES] indicator is flashing.
fig.LCD
If you do not want to save the Setup, press [DEC/NO].
The operation is cancelled, and you are returned to the Tone screen.
9
Press [INC/YES].
The confirmation message appears.
fig.LCD
10
When [INC/YES] is pressed, saving of the Setup begins.
When you have finished saving the Setup, “COMPLETED” appears in the
display and the [WRITE] indicator goes out.
You are returned to the Tone screen.
NOTE
Never switch off the power
while “Please keep on
power” appears in the
display.
Doing so may damage the
internal memory, making it
impossible to use this
instrument.
RD-700_e.book 57 ページ ２００３年１０月２３日 木曜日 午後４時５９分