Roland RD-700 - Manual (Page 89)

89
Detailed Settings for Each Function ([EDIT])
Edit Mode
Turning the Controllers in Each
Part On and Off
These settings determine whether the pedals connected to
each PEDAL jack (Damper, FC1, FC2), the Modulation lever,
the Bender, and the [CONTROL] knob are used to control the
Parts (ON), or not (OFF).
Assigning Internal Parts to Local
Parts (Part Assign)
This determines which internal parts are assigned to the
Local parts.
Setting MIDI Receive Parts
(Internal Part Prm)
The sixteen Parts played by the RD-700’s internal sound
generator are referred to as “Internal Parts.”
When connecting an external MIDI device to a sequencer or
other device, by assigning the Receive channel to an Internal
Part you can receive MIDI messages from the external MIDI
device and control the Internal Parts.
These parameters determine how each Part will receive MIDI
messages.
How to Make Settings
1. Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.Editmenu2.eps_150
2. Press CURSOR [ ]/[ ] to select “8. Internal Part
Prm.”
3. Press CURSOR [ ] to display the Edit screen.
fig.midipart1.eps_150
fig.midipart2.eps_150
fig.midipart3.eps_150
4. Press CURSOR [ ] or [ ] to switch screens, and press
CURSOR [ ] or [ ] to move the cursor to the
parameter to be set.
5. Press [INC/YES] or [DEC/NO] to set the value.
6. When you have finished making the settings, press
[EDIT], extinguishing its indicator.
You are returned to the Tone screen.
Parameter Value
Damper Pedal Sw
ON, OFF
FC1 Pedal Sw
FC2 Pedal Sw
Modulation Sw
Bender Sw
Control Sw
Parameter Value
Part Assign 1–16
RD-700_e.book 89 ページ ２００３年１０月２３日 木曜日 午後４時５９分