Roland RD-700 - Manual (Page 40)

40
Performing with the Keyboard
Performing
Selecting Tones Without Pressing [NUM LOCK]
You can select tones stored on expansion boards with [NUM LOCK] off.
1. Press EXPANSION [A] or [B] to make its indicator light.
2. Use the TONE SELECT buttons to specify the tone number.
Wave expansion board tones are assigned to the TONE SELECT buttons
as shown below.
fig.Q1-10
3. Press [DEC/NO] or [INC/YES] to select the tone.
The TONE SELECT button included in the selected Tone numbers flash.
4. Either press the flashing TONE SELECT button or play the keyboard.
The TONE SELECT button stops flashing and remains lit, and the
selected tone is set.
001
:
010
011
:
020
021
:
030
031
:
040
041
:
050
051
:
060
061
:
070
071
:
080
081
:
090
091
:
100
101
:
Tone
Number
Rhythm
Set
Wave Expansion Board Rhythm Set Tone Numbers
When selecting a Wave Expansion Board Rhythm Set with the RD-700, the
Wave Expansion Board Rhythm Sets are placed after Patches (called Tones
on the RD-700).
Thus, when you want to specify a Wave Expansion Board Rhythm Set in
terms of a Tone number, the Tone number can be arrived at by adding the
desired Rhythm Set number in the Rhythm Set List to the last Patch number
in the Patch List.
RD-700_e.book 40 ページ ２００３年１０月２３日 木曜日 午後４時５９分