Making tone settings (tone edit), How to make settings, 79 detailed settings for each function ([edit]) – Roland RD-700 User Manual

Page 79: Chorus feedback, Other prm>, value, When chorus/delay is set to delay delay-center, Delay-left, Delay-right

Advertising
background image

79

Detailed Settings for Each Function ([EDIT])

Edit Mode

Chorus Feedback

Sets the level at which the chorus sound is re-input (fed back)
into the chorus. By using feedback, a denser chorus sound
can be created.

Higher values result in a greater feedback level.

Values:

0–127

<Other Prm>, Value

You can make more detailed chorus settings.

When Other Prm is selected, the indication of the
corresponding Value changes, and the value is set.

Refer to

“CHORUS”

(p. 134).

When Chorus/Delay is Set to Delay

Delay-Center

The delay time increases as the value is raised.

Values:

0–1000 (ms), Beat

Delay-Left

This sets the delay time for the delay located at the left side of
the stereo field.

Values:

0–1000 (ms), Beat

Delay-Right

This sets the delay time for the delay located at the right side
of the stereo field.

Values:

0–1000 (ms), Beat

Delay Center, Delay Left and Delay Right can be specified as
note value lengths for a specific tempo. In this case, specify
the value of the desired note.

<Other Prm>, Value

You can make more detailed delay settings.

When Other Prm is selected, the indication of the
corresponding Value changes, and the value is set.

Refer to

“DELAY”

(p. 134).

Making Tone Settings (Tone Edit)

You can make more detailed settings to the tones assigned to
each of the Internal parts.

NOTE

In certain selected Tones, there may be parameters that
cannot be changed.

How to Make Settings

1.

Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.

fig.Editmenu1.eps_150

2.

Press CURSOR [

]/[

] to select “4.Tone Edit.”

3.

Press CURSOR [

] to display the Edit screen.

fig.tone1.eps_150

fig.tone2.eps_150

fig.tone3-1.eps_150

fig.tone1.eps_150

4.

Press CURSOR [

] or [

] to switch screens, and press

CURSOR [

] or [

] to move the cursor to the

parameter to be set.

5.

Press [INC/YES] or [DEC/NO] to set the value.

6.

When you have finished making the settings, press
[EDIT], extinguishing its indicator.
You are returned to the Tone screen.

RD-700_e.book 79 ページ 2003年10月23日 木曜日 午後4時59分

Advertising