Roland RD-700 - Manual (Page 67)

67
Making Detailed Settings for the Piano Tones (Piano Edit)
Piano Edit
Changing the Sense of Space
Surrounding the Sound
(Ambience)
Changing the sound’s ambience allows you give your
performances a sound resembling that obtained in a wide
open space.
NOTE
Depending on the piano Tone selected, this setting may not
be available.
Changing the Amount of Reverb
Effect (Reverb Level)
Adjusts the depth of the Reverb effect. This functions the
same way as the REVERB knob, but the setting made here
can be called up simply by pressing ONE TOUCH [PIANO].
Making the Midrange Equalizer
Settings (EQ-SW/EQ Gain/
EQ Frequency/EQ Q)
This sets the midrange equalization.
NOTE
Depending on the piano Tone selected, this setting may not
be available.
Parameter Value Description
Ambience 0–5
The effect becomes deeper
as the value is increased.
Parameter Value Description
Reverb Level 0–127
The reverb effect be-
comes stronger as the val-
ue is increased.
Parameter Value Description
EQ-SW ON, OFF
This determines
whether the following
EQ-Freq, EQ Gain, and
EQ Q settings are en-
abled (ON), or not
(OFF).
EQ Gain -15.0–+15.0 dB
Change the amount of
equalization (gain).
EQ
Frequency
200, 250, 315, 400,
500, 630, 800,
1000, 1250, 1600,
2000, 2500, 3150,
4000, 5000, 6300,
8000 Hz Set Frequency Point.
Changes the level of
the selected frequency
range, with frequency
selected here at the cen-
ter.
EQ Q
0.5, 1.0, 2.0, 4.0,
8.0
Adjusts the “Q” (band-
width) of equalization.
The higher the value,
the narrower the range
of frequencies that are
affected.
RD-700_e.book 67 ページ ２００３年１０月２３日 木曜日 午後４時５９分