Turning the power on and off, Turning on the power, Switch turns the power on/off (p. 24) – Roland RD-700 User Manual
Page 24: Turn on the power, as described in, P. 24), Mettre sous tension de la façon décrite sous, Turning on the, Power
24
Getting Ready
Getting Ready
Turning the Power On and Off
Once the connections have been completed, turn on power to your various
devices in the order specified. By turning on devices in the wrong order, you
risk causing malfunction and/or damage to speakers and other devices.
Turning On the Power
1
Before you switch on the power, turn the volume down all the
way by rotating the VOLUME Slider.
Also completely turn down the volume of any connected audio device and
other equipment.
fig.00-06
2
Press the upper portion of the [POWER] switch to turn on the
power.
The unit is powered up, and the display's backlighting comes on.
fig.00-07
3
Turn on the power to connected external devices.
4
Adjust the volume of the connected external device.
5
Adjust the RD-700’s volume to obtain the proper volume level.
NOTE
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
before the unit will operate
normally.
NOTE
To prevent incorrect
functioning of the Pitch
Bend Lever (p. 48), refrain
from touching the lever
while the power to the RD-
700 is turned on.
RD-700_e.book 24 ページ ２００３年１０月２３日 木曜日 午後４時５９分