Roland RD-700 - Manual (Page 61)

61
Using the RD-700 As a Master Keyboard
Master Keyboard
Selecting Sounds on an External MIDI Device
To switch the tones of an external MIDI device, the program number and the
MSB/LSB of the Bank Select message are entered as numerical values on the
RD-700.
fig.panel
1
Press [MIDI TX], getting the indicator to light.
If “MSB” doesn’t appear on screen, press CURSOR [ ] several times to
display the following screen.
fig.LCD
2
Press CURSOR [ ], [ ], [ ], or [ ] to move the cursor,
then press [INC/YES] or [DEC/NO] to set the MSB, LSB, and
PC for each part.
Pressing [INC/YES] and [DEC/NO] simultaneously switches the settings
value to “--- (OFF).”
When this setting is “--- (OFF),” bank select messages will not be
transmitted.
Parameter Tx Settings
MSB (Bank Select MSB) CC 32 0~127, ---(OFF)
LSB (Bank Select LSB) CC 00 0~127, ---(OFF)
PC (Program Change) Program Change 0~127, ---(OFF)
CONTROL
1 2
NOTE
If the external MIDI sound
generator transmits a
Program number or a Bank
number for which no Tone
has been assigned, an
alternate Tone may be
selected, or in some cases,
there may be no sound
played. If you do not want
to transmit the Program
number or Bank Select, use
the procedure described
left to set the PC/MSB/LSB
to “--- (OFF).”
RD-700_e.book 61 ページ ２００３年１０月２３日 木曜日 午後４時５９分