Technicolor - Thomson ST585 V6 - Manual (Page 102)

E-DOC-CTC-20061027-0004 v1.0
Config Commands
78
config load
Load complete saved (backup) or default configuration file.
SYNTAX:
where:
i
Use the command :config flush before loading a configuration file.
config load [load_ip = <{enabled | disabled}>]
[defaults = <{enabled | disabled}>]
[flush = <{enabled | disabled}>]
[echo = <{disabled | enabled}>]
[filename = <string>]
load_ip Load IP settings (enabled) or not (disabled).
Note Not keeping the IP settings could cause lost IP connectivity in the
LAN.
OPTIONAL
defaults Load default configuration (enabled) or saved configuration (disabled).
Note If not specified, the saved configuration will be loaded.
OPTIONAL
flush Flush the current configuration before loading a new configuration
(enabled) or not (disabled). OPTIONAL
echo Echo each command string when loaded (enabled) or not (disabled). OPTIONAL
filename Name of the configuration file to be loaded. OPTIONAL