Technicolor - Thomson ST585 V6 - Manual (Page 134)

E-DOC-CTC-20061027-0004 v1.0
DHCP Commands
110
dhcp client ifadd
Create a DHCP client.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
dhcp client ifadd intf = <string>
[defrqoptions = <{disabled|enabled}>]
intf The name of the dynamic interface for which a DHCP lease
must be created. REQUIRED
defrqoptions Enable/Disable the creation of the default Parameter Request
List. OPTIONAL
=>dhcp client iflist
No dynamic interfaces defined.
=>dhcp client ifadd intf=myPPP_ppp
[dhcp client]=>iflist
DHCP Client Info :
Interface : myPPP_ppp
DHCP Client State : [INIT]
HW address : 00:0e:50:91:26:5a
Client ID :
IP Address : 0.0.0.0
p-t-p IP : 0.0.0.0
Default Gateway :
Number of leases: 1
Total size of table: 68, in use: 1, free: 98 %=>
dhcp client ifdelete Delete a DHCP client.
dhcp client iflist List all the DHCP leases attached to dynamic interfaces.
interface list Display interfaces.