Technicolor - Thomson ST585 V6 - Manual (Page 477)

E-DOC-CTC-20061027-0004 v1.0
IP Commands
453
ip rtdelete
Delete a route from the routing table.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ip rtdelete dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <string>]
[gateway = <ip-address>]
[intf = <string>]
dst The destination IP address(es) for this route.
Note Supports cidr notation.
REQUIRED
dstmsk The destination IP address mask. OPTIONAL
label The name of the label. OPTIONAL
gateway The IP address of the next hop. The next hop must be directly connected.
Note The parameters gateway and intf are mutually exclusive.
OPTIONAL
intf Only for special interface routes: the outgoing IP interface name.
Note The parameters gateway and intf are mutually exclusive.
OPTIONAL
=>ip rtlist
Destination Label Gateway Intf Mtrc Status
10.0.0.0/24 10.0.0.140 eth0 0 [UP]
10.10.0.0/24 Interactive 10.0.0.140 eth0 0 [UP]
10.0.0.140/32 10.0.0.140 eth0 0 [UP]
127.0.0.1/32 127.0.0.1 loop 0 [UP]
=>ip rtdelete dst=10.10.0.0/24 label=Interactive gateway=10.0.0.140
=>ip rtlist
Destination Label Gateway Intf Mtrc Status
10.0.0.0/24 10.0.0.140 eth0 0 [UP]
10.0.0.140/32 10.0.0.140 eth0 0 [UP]
127.0.0.1/32 127.0.0.1 loop 0 [UP]
=>
ip rtadd Add a route to the routing table.
ip rtlist Display the routing table.