Technicolor - Thomson ST585 V6 - Manual (Page 594)

E-DOC-CTC-20061027-0004 v1.0
NAT Commands
570
nat mapdelete
Delete an address mapping from a NAT enabled interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
nat mapdelete intf = <string>
index = <number>
intf The IP interface name. REQUIRED
index The map index.
Tip Use the command :nat maplist to obtain a list
of the mapindexes.
REQUIRED
=>nat maplist
Idx Type Interface
Outside Address Inside Address Use
1 NAPT myPPP_ppp 100.100.100.1 unmapped 0
1 NAPT eth0 any:80 127.0.0.1:8080 0
2 NAPT eth0 any:1080 127.0.0.1:8080 0
3 NAPT eth0 any:8080 127.0.0.1:8080 0
=>nat mapdelete intf=myPPP_ppp index=1
=>nat maplist
Idx Type Interface
Outside Address Inside Address Use
1 NAPT eth0 any:80 127.0.0.1:8080 0
2 NAPT eth0 any:1080 127.0.0.1:8080 0
3 NAPT eth0 any:8080 127.0.0.1:8080 0
=>
nat mapadd Add an address mapping to a Network Address Translation (NAT) enabled
interface.
nat maplist Display the address mapping for a NAT enabled interface.