Technicolor - Thomson ST585 V6 - Manual (Page 383)

E-DOC-CTC-20061027-0004 v1.0
Firewall Commands
359
firewall level set
Set the security level or display the current security level.
SYNTAX:
where:
EXAMPLE:
firewall level set [name = <string>]
name The name of the security level to be set.
Note If no security level is specified, the current security
level will be shown.
OPTIONAL
=>firewall level list
Level Config
============
Active level: Disabled
nr name udptrack service readonly description
------------------------------------------------------------------------------------
1
BlockAll strict disabled yes Use this Security Level to block all
traffic from and to the Internet.
2 Standard loose enabled yes Use this Security Level to allow all
outgoing connections and block all
incoming traffic. Services and
Application Sharing are allowed to open
pinholes in the firewall.
3 Disabled loose enabled yes Disabled the firewall. All traffic is
allowed to pass through your SpeedTouch.
4 Test loose disabled yes Another level in the firewall
=>firewall level set
:firewall level set name=Disabled
=>
=>firewall level set name=BlockAll
=>firewall level set
:firewall level set name=BlockAll
=>