Technicolor - Thomson ST585 V6 - Manual (Page 114)

E-DOC-CTC-20061027-0004 v1.0
Connection Commands
90
connection config
Configure the connection handling.
SYNTAX:
where:
EXAMPLE:
connection config [configchangemode = <{immediate | delayed}>]
[probes = <{disabled | enabled}>]
[udptrackmode = <{strict | loose}>]
configchangemode Select how configuration changes are handled.
Choose between:
>
immediate
>
delayed.
The default is immediate .
OPTIONAL
probes Enable or disable live probes on idle connections.
The default is
disabled .
OPTIONAL
udptrackmode Select the User Datagram Protocol (UDP)
connection tracking mode.
Choose between:
> strict : replies to a request from a client must be
in a specific window to the client.
>
loose : inbound packets are allowed on the port
that was first used to start the communication
with the server (for example to allow a client of
an online game to obtain peer-to-peer
information from other clients of that same
online game).
The default is strict .
OPTIONAL
=>connection config
config change mode : immediate
alive probes
: disabled
udp tracking mode : loose
=>