Technicolor - Thomson ST585 V6 - Manual (Page 264)

E-DOC-CTC-20061027-0004 v1.0
DynDNS Commands
240
dyndns service modify
Modify specific dynamic DNS service settings.
SYNTAX:
where:
dyndns service modify name = <string>
[server = <string>]
[port = <{supported TCP/UDP port name} or number>]
[request = <string>]
[updateinterval = <number{0-2097120}>]
[retryinterval = <number{0-600}]
[max_retry = <number{1-5}>]
name The name of the dynamic DNS service.
Choose between:
>
dyndns
>
statdns
>
custom
> No-IP
> DtDNS
> gnudip.
REQUIRED
server The hostname of the dynamic DNS server. OPTIONAL
port The port of the dynamic DNS server.
Select one of the supported TCP/UDP port names (see
“ Supported
TCP/UDP Port Names” on page 787 ) or, alternatively, specify the port
number.
OPTIONAL
request The dynamic DNS request string. OPTIONAL
updateinterval A number between 0 and 2097120 (seconds).
Represents the time interval before a dynamic update is sent to the
dynamic DNS server.
Note The value 0 means disabled.
OPTIONAL
retryinterval A number between 0 and 600 (seconds).
Represents the interval between retries if communication with the
dynamic DNS server fails.
The default is
30 .
Note The value 0 means disabled.
OPTIONAL
max_retry A number between 1 and 5.
Represents the maximum number of retries if communication with
the dynamic DNS server fails.
The default is
3 .
OPTIONAL