Technicolor - Thomson ST585 V6 - Manual (Page 58)

E-DOC-CTC-20061027-0004 v1.0
ATM Commands
34
atm bundle ifadd
Add an interface on a bundle.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
i
Up to 8 interfaces or (sub-)bundles can be added to one bundle.
atm bundle ifadd name = <string>
intf = <string>
[index = <number{0-6}>]
name The name of the bundle to which an ATM interface must be added. REQUIRED
intf The name of the ATM interface to be added. REQUIRED
index A number between 0 and 6.
Represents the index of the ATM interface. OPTIONAL
=>atm bundle ifadd name=myBundle intf=myATMintf
=>atm bundle list
myBundle: Connection state : not-connected
Retry: 15 Policy: connection
TX requested bytes: 0 requested frames: 0
TX bytes: 0 frames: 0
RX bytes: 0 frames: 0
Interface: myATMintf State: enabled Selector: 0-15
TX bytes: 0 frames: 0
RX bytes: 0 frames: 0
RX discarded bytes: 0 discarded frames: 0
Disconnects: 0
=>
atm bundle ifdelete Remove an interface from a bundle.