Technicolor - Thomson ST585 V6 - Manual (Page 75)

E-DOC-CTC-20061027-0004 v1.0
ATM Commands
51
atm oam cc send
Send CC activate/deactivate to connection.
SYNTAX:
where:
RELATED COMMANDS:
atm oam cc send port = <{dsl0} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[span = <{segment | end2end}>]
[action = <{activate | deactivate}>]
[direction = <{source | sink | both}>]
port The ATM port number.
Choose between:
>
DSL0.
Or specify a port number (dsl0 has port number 0).
REQUIRED
vpi A number between 0 and 15.
Represents the VPI. REQUIRED
vci A number between 0 and 511.
Represents the VCI.
Note For a VP cross-connection, use 0 or do not specify.
OPTIONAL
span Select the CC span.
Choose between:
>
end2end : monitoring occurs on the entire VC between two ATM end
stations.
> segment : monitoring occurs on a VC segment between the
Thomson ST and a first-hop ATM switch.
OPTIONAL
action Activate or deactivate CC.
The default is
deactivate .
OPTIONAL
direction Indicates the direction of CC activity.
Choose between:
>
source
>
sink
>
both.
The default is both .
OPTIONAL
atm oam cc list Display Continuity Check (CC) configuration.
atm oam cc modify Modify CC on the connection.