Technicolor - Thomson ST585 V6 - Manual (Page 28)

E-DOC-CTC-20061027-0004 v1.0
Root Commands
4
ping
Send ICMP ECHO_REQUEST packets.
SYNTAX:
where:
EXAMPLE:
ping proto = <{ip|atm}>
addr = <ip-address>
dest = <string>
[count = <number{0-1000000}>]
[size = <number{28-20028}>]
[interval(ms) = <number{100-1000000}>]
[DF-bit = <{disabled|enabled}>] [srcaddr = <ip-address>]
proto The interface type to be used.
Choose between:
>
ip
>
atm
REQUIRED
addr The destination IP address. REQUIRED
dest The destination address for the request. REQUIRED
count A number between 1 and 1000000.
Represents the number of pings to send.
The default is
5 .
OPTIONAL
size A number between 0 and 20000.
Represents the size of the ping payload(s). OPTIONAL
interval A number between 100 and 1000000.
Represents the interval in milliseconds between packets.
The default is
100 .
OPTIONAL
DF-bit Set the Don't Fragment bit (or leave unset) in the IP header of ping.
The default is
disabled .
OPTIONAL
scraddr The IP source address to use. OPTIONAL
=>:ping proto=ip addr=192.168.1.70
Legend : Ping successful(!)
Ping Timeout(.)
Hit ctrl-g to abort...
!!!!!
--- ping statistics ---
5 packet(s) transmitted, 5 successful, 0% loss
rtt min/avg/max = 1 / 2 / 4 ms
=>