Technicolor - Thomson ST585 V6 - Manual (Page 376)

E-DOC-CTC-20061027-0004 v1.0
Firewall Commands
352
firewall level delete
Delete a security level.
SYNTAX:
where:
EXAMPLE:
firewall level delete name = <string>
name The name of the security level to be deleted. REQUIRED
=>firewall level list
Level Config
============
Active level: Disabled
nr name udptrack service readonly description
----------------------------------------------------------------------------------------
1
BlockAll strict disabled yes Use this Security Level to block all
traffic from and to the Internet.
2 Standard loose enabled yes Use this Security Level to allow all
outgoing connections and block all
incoming traffic. Services and
Application Sharing are allowed to open
pinholes in the firewall.
3 Disabled loose enabled yes Disabled the firewall. All traffic is
allowed to pass through your SpeedTouch.
4 Test strict disabled yes Another level in the firewall
=>firewall level add name=Test text="Another level in the firewall"
=>firewall level
list
Level Config
============
Active level: Disabled
nr name udptrack service readonly description
---------------------------------------------------------------------------------------
1
BlockAll strict disabled yes Use this Security Level to block all
traffic from and to the Internet.
2 Standard loose enabled yes Use this Security Level to allow all
outgoing connections and block all
incoming traffic. Services and
Application Sharing are allowed to open
pinholes in the firewall.
3 Disabled loose enabled yes Disabled the firewall. All traffic is
allowed to pass through your SpeedTouch.
=>