Technicolor - Thomson ST585 V6 - Manual (Page 491)

E-DOC-CTC-20061027-0004 v1.0
IP Commands
467
ip debug traceconfig
Display/modify the IP stack trace configuration.
SYNTAX:
where:
ip debug traceconfig [input = <{none | label | -telnet | -host |
-broadcast | all}>]
[forward = <{none | label | -telnet | -host |
-broadcast | all}>]
[output = <{none | label | -telnet | -host |
-broadcast | all}>]
[drop = <{none | label | -telnet | -host |
-broadcast | all}>]
[path = <{none | label | -telnet | -host |
-broadcast | all}>]
[mode = <{line | dump}>]
[arp = <{none | all}>]
input Define the input packets that will be traced.
The default is
none .
OPTIONAL
forward Define the forward packets that will be traced.
The default is
none .
OPTIONAL
output Define the output packets that will be traced.
The default is
none .
OPTIONAL
drop Define the packet drops that will be traced.
The default is
all .
OPTIONAL
path Define the packet that will be path-traced.
The default is
none .
OPTIONAL
mode Select the packet dump method.
Choose between:
>
line :
>
dump : .
The default is line .
OPTIONAL
arp Define the ARP packets that will be traced.
The default is
none .
OPTIONAL