Technicolor - Thomson ST585 V6 - Manual (Page 29)

E-DOC-CTC-20061027-0004 v1.0
Root Commands
5
traceroute
Send ICMP/UDP packets to trace the IP path.
SYNTAX:
where:
traceroute addr = <ip-address>
[count = <number{1-10}>]
[size = <number{1-20000}>]
[interval = <number{1000-60000}>]
[maxhops = <number{1-255}>]
[dstport = <number{1-65535}>]
[maxfail = <number{0-255}>]
[type = <{icmp | udp}>]
[utime = <{disabled | enabled}>]
addr The destination IP address. REQUIRED
count A number between 1 and 10.
Represents the number of times to reissue a traceroute request with the
same TTL.
The default is
3 .
OPTIONAL
size A number between 1 and 20000 (bytes).
Represents the size of the traceroute packet(s).
The default is
1 .
OPTIONAL
interval A number between 1000 and 60000 (milliseconds).
Represents the intermediate interval between two packets.
The default is
1000 .
OPTIONAL
maxhops A number between 1 and 255.
Represents the maximum number of routers through which a packet can
pass.
The default is
30 .
OPTIONAL
dstport A number between 1 and 65535.
Represents the UDP destination port number to send to. OPTIONAL
maxfail A number between 0 and 255.
Represents the maximum number of consecutive timeouts allowed
before terminating a traceroute request.
The default is
5 .
OPTIONAL
type The type of traceroute packet(s).
Choose between:
> icmp
> udp .
The default is icmp .
OPTIONAL
utime Display time in useconds (enabled) or not (disabled).
The default is
enabled .
OPTIONAL