Technicolor - Thomson ST585 V6 - Manual (Page 618)

E-DOC-CTC-20061027-0004 v1.0
PPP Commands
594
ppp iflist
Display the PPP interfaces.
SYNTAX:
where:
EXAMPLE INPUT/OUTPUT :
RELATED COMMANDS:
ppp iflist [intf = <intfname>]
intf The name of the PPP interface.
Note If not specified, all PPP interfaces are shown.
OPTIONAL
=>ppp iflist
Internet: dest : RELAY
[00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0
mru = 1492 Tx inactivity = 1200s left = 0s
auth = auto user = password =
admin state = down oper state = down link state = not-connected
LCP : state = initial retransm = 10 term. reason =
IPCP: state = initial retransm = 0 term. reason =
acname : --- service : ---
Rt_PPPoA: dest : RtPPPoA_atm [00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
mru = 1500
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto
user = johndoe@ISP password = ********
admin state = up oper state = down link state = connected
LCP : state = reqsent retransm = 1 term. reason =
IPCP: state = initial retransm = 0 term. reason =
=>
ppp ifadd Create a new PPP interface.
ppp ifdelete Delete a PPP interface.