Technicolor - Thomson ST585 V6 - Manual (Page 512)

E-DOC-CTC-20061027-0004 v1.0
Label Commands
488
label modify
Modify a label configuration.
SYNTAX:
where:
label modify name = <string>
[classification = <{ignore | overwrite | increase}>]
[defclass = <number{0-15} | dscp | default>]
[ackclass = <number{0-15} | defclass | prioritize>]
[bidirectional = <{disabled | enabled}>]
[inheritance = <{disabled | enabled}>]
[tosmarking = <{disabled | enabled}>]
[tos = <number{0-255}>]
[dscp = <{DSCP name> | <number>}]
[precedence = <{IP precedence type> | <number>}]
[trace = <{disabled | enabled}>]
name The name of the label to be configured. REQUIRED
classification Select the method of classification, in other words, determine
what the Layer 3 class assignment must do with the priority of
the data packet (as set by Layer 2).
Choose between:
>
ignore : Ignore the class parameters defclass and ackclass ,
but use the class as set by Layer 2 (VLAN user priority, ATM
QoS).
> overwrite : Change the class to defclass and ackclass ,
overwriting the value set by Layer 2 (VLAN user priority,
ATM QoS).
> increase : Change the class according to defclass and
ackclass , but only if the defclass value is higher than the
class value already set by Layer 2.
The default is ignore .
Note The class as set by Layer 2 is derived from:
>
the VLAN user priority (in case of VLAN or priority
tagged frames)
> the ATM PVC QoS class (in case the packet is
received from an ATM PVC).
For non-VLAN frames or non-PVC received data, Layer
2 sets the internal class (priority) to
4 by default.
OPTIONAL
defclass The default priority class of the assigned connection.
Choose between:
> A number between 0 and 15
> dscp
> default.
The default is 0 .
OPTIONAL