Technicolor - Thomson ST585 V6 - Manual (Page 700)

E-DOC-CTC-20061027-0004 v1.0
System Commands
676
system reset
Reset the Thomson ST to its factory or ISP defaults and reboot the device.
SYNTAX:
where:
EXAMPLE:
!
All user specific settings and all saved configuration changes are lost after reboot.
system reset factory yes/no = <{yes | no}>
proceed no/yes = <{no | yes}>
factory yes/no Choose between:
> yes: delete user and ISP specific settings.
> no: delete user specific settins only.
REQUIRED
proceed no/yes Confirmation for resetting the modem.
If no confirmation is given, the Thomson ST will not be reset. REQUIRED
=>system reset
---------------
!! WARNING !!
---------------
The modem will be reset to (factory) defaults clearing all user (and ISP) settings.
Specifying <factory=yes> deletes user and ISP specific settings.
Connectivity with the ISP network might be lost.
<factory=no> deletes user specific settings only.
factory yes/no = no
proceed no/yes = no
:system reset factory yes/no=no proceed no/yes=no
=>
=>system reset
---------------
!! WARNING !!
---------------
The modem will be reset to (factory) defaults clearing all user (and ISP) settings.
Specifying <factory=yes> deletes user and ISP specific settings.
Connectivity with the ISP network might be lost.
<factory=no> deletes user specific settings only.
factory yes/no = yes
proceed no/yes = yes
:system reset factory yes/no=yes proceed no/yes=yes
.....
(lost session connectivity due to reboot)
.....