Technicolor - Thomson ST585 V6 - Manual (Page 539)

E-DOC-CTC-20061027-0004 v1.0
MBUS Commands
515
mbus client exec
Execute mbus command.
SYNTAX:
where:
mbus client exec cmd = <{addobject | deleteobject | getparamattributes
| getparamcount | getparamnames | getparamvalues |
getpath | setparamvalue}>
[param = <quoted string>]
[value = <quoted string>]
[gettype = <{object | parameter | path}>]
[depth = <number>]
[processcmd = <{disabled | enabled}>]
[readcommitted = <{disabled | enabled}>]
[onerrorrollback = <{disabled | enabled}>]
cmd Mbus command name.
Choose between:
>
addobject
>
deleteobject
>
getparamattributes
>
getparamcount
>
getparamnames
>
getparamvalues
>
getpath
>
setparamvalue
REQUIRED
param Parameter name. OPTIONAL
value Parameter value to set. OPTIONAL
gettype Get type elements.
Choose between:
>
object
>
parameter
>
path
The default is parameter .
OPTIONAL
depth Number of levels to recurse, default=-1 (all). OPTIONAL
processcmd Enable or disable the process SET_PARAMVALUE
command flag.
The default is
enabled .
OPTIONAL
readcommitted Enable or disable the read committed data only
(MBUS_CMD_GET_PARAMVALUES) flag.
The default is
enabled .
OPTIONAL
onerrorrollback Enable or disable the on error rollback flag.
The default is
enabled .
OPTIONAL