Technicolor - Thomson ST585 V6 - Manual (Page 399)

E-DOC-CTC-20061027-0004 v1.0
GRP Commands
375
grp rip config
Configure the RIP settings.
SYNTAX:
where:
grp rip config state = <{disabled | enabled}>
[version = <{rip_unspec | rip_v1 | rip_v2}>]
[defmetric = <number{1-16}>]
[updatetime = <number{1-3600}>]
[timeouttime = <number{1-3600}>]
[garbagetime = <number{1-3600}>]
[impcrt = <{disabled | enabled}>]
[impkrt = <{disabled | enabled}>]
[impsrt = <{disabled | enabled}>]
[impdefkrt = <{disabled | enabled}>]
[impdefsrt = <{disabled | enabled}>]
[exprt = <{disabled | enabled}>]
[expdefrt = <{disabled | enabled}>]
[txdefrt = <{disabled | enabled}>]
[trace = <{disabled | enabled}>]
state Enable or disable the RIP daemon.
The default is
enabled .
REQUIRED
version Configure the RIP version to be applied.
Choose between:
> rip_unspec : No RIP version is specified as such. The actual RIP
version to be used is negotiated with the remote side.
>
rip_v1 : RIP version 1 is used.
>
rip_v2 : RIP version 2 is used.
The default is rip_v2 .
OPTIONAL
defmetric A number between 1 and 16 (hops).
Represents the default RIP metric for imported routes.
The default is
1 .
OPTIONAL
updatetime A number between 1 and 3600 (seconds).
Represents the update timer value of the RIP routing table.
The default is
30 .
OPTIONAL
timeouttime A number between 1 and 3600 (seconds).
Represents the timeout timer value of the RIP routing info.
The default is
180 .
OPTIONAL
garbagetime A number between 1 and 3600 (seconds).
Represents the garbage collection timer value.
The default is
120 .
OPTIONAL
impcrt Enable or disable the import of connected routes.
The default is
enabled .
OPTIONAL
impkrt Enable or disable the import of kernel routes.
The default is
enabled .
OPTIONAL