Technicolor - Thomson ST585 V6 - Manual (Page 585)

E-DOC-CTC-20061027-0004 v1.0
NAT Commands
561
29 NAT Commands
Introduction
This chapter describes the commands of the nat command group.
Contents
This chapter covers the following commands:
nat config Display/modify global NAT configuration options. 562
nat flush Flush the current NAT configuration. 563
nat ifconfig Modify address translation on an IP interface. 564
nat iflist Display the address translation configuration on all the interfaces. 565
nat mapadd Add an address mapping to a Network Address Translation (NAT)
enabled interface. 566
nat mapdelete Delete an address mapping from a NAT enabled interface. 570
nat maplist Display the address mapping for a NAT enabled interface. 571
nat tmpladd Add an address mapping template. 572
nat tmpldelete Delete an address mapping template. 576
nat tmpllist Display the address mapping templates. 577
nat tmplinst Instantiate address mapping templates for a given dynamic address. 578