Technicolor - Thomson ST585 V6 - Manual (Page 291)

E-DOC-CTC-20061027-0004 v1.0
Eth Commands
267
eth bridge dynvlan add
Add a dynamic VLAN membership entry.
SYNTAX:
where:
RELATED COMMANDS:
eth bridge dynvlan add [id = <number{0-100000}>]
hwaddr = <masked-hardware-address>
vlan = <string>
[remvlan = <{default}>]
id A number between 0 and 100000.
Represents the id of the dynamic VLAN membership entry. OPTIONAL
hwaddr The (masked) ethernet MAC address of the dynamic VLAN
membership entry. REQUIRED
vlan The VLAN for the dynamic VLAN membership entry. REQUIRED
remvlan The VLAN that will be removed from the bridge interface. OPTIONAL
eth bridge dynvlan actlist Display the active MAC entries for the dynamic VLAN membership.
eth bridge dynvlan config Modify the dynamic VLAN membership configuration.
eth bridge dynvlan delete Delete a dynamic VLAN membership entry.
eth bridge dynvlan list Display a dynamic VLAN membership entry.