5 port 7 (p70 to p76) – Toshiba H1 SERIES TLCS-900 User Manual
Page 62
TMP92CM22
2007-02-16
92CM22-60
3.5.5
Port 7 (P70 to P76)
Port 7 is a 7-bit general-purpose I/O port (P70 to P75 are used for output only).
Bits can be individually set as either inputs or outputs by control register P7CR and
function register P7FC.
In addition to functioning as a general-purpose I/O port, P70 to P73 pins can also
function as output pin of read/write strobe signals to connect with an external memory. P74
pin can also function as CLKOUT output pin when outputted internal clock. P76 pin can
also function as wait input.
After reset, P71 to P75 pins are set to output port mode, and P76 pin is set to input port
mode.
P70 pin set port 1 to pins of follow function by combination of AM1 and AM0 pins.
AM1
AM0
Function Setting after Reset
0
0
Don’t use this setting
0
1
CPU control pin (
RD
)
1
0
CPU control pin (
RD
)
1
1
Don’t use this setting
Figure 3.5.9 Port 7 (P70 to P75)
Internal data bus
Reset
Output latch
P7 write
S
A
Selector
B
P7 read
Port 7
P70 (
RD
)
P71 (
WRLL
)
P72 (
WRLU
)
P73
P74 (CLKOUT)
P75 (R/
W
)
Function control
(on bit basis)
P7FC write
Output buffer
RD
,
WRLL
,
WRLU
,
CLKOUT, R/
W
Note: P73 is fixed to VCC.