Continued), Table 1: af-300c standard – GE Industrial Solutions AF-300C AC Drive User Manual
Page 23
A F - 3 0 0 C
G E K - 8 5 7 1 8
TABLE 1: AF-300C
STANDARD
(continued)
ITEM
SPECIFICATION
lnverter HP (400-460 VAC)
40 50 60 75
100 125 150 175 200 250 300
INDICATION:
Frequency Meter Output
Touch Panel LED
Operation:
LED Indication (charge light)
ENVIRONMENT:
Installation Location
Ambient Temperature
20 to 90% Relative Humidity (free of condensation).
Vibration
or less.
Temperature During
-25 to
C
APPROXIMATE WEIGHTS
Pounds
Kilograms
Analog 0 to
VDC, Pulse Frequency (6 to 100) x Output Frequency.
Output Frequency, Set Frequency, Synchronous Speed, Output Current,
Output Voltage, Load Revolution Speed, and Presence of Input and Output
Signals.
Indication of Function Code and Set Data (Refer to Function Code List).
Overcurrent During Acceleration,
Overcurrent During
Deceleration, OC3 Overcurrent During Constant Speed, OV Overvoltage,
LV Undervoltage,
Overload, OH1 lnverter Overheat,
Motor Overload, OH2 External Failure,
CPU Abnormal or Failure, and
Failure History (three previous failure indications).
Lights up when DC Link capacitors are charged (DC Link voltage is present),
Indoors, altitude of 3281 ft (1000 meters) or less, free of direct sunlight,
corrosive gas, and dust. Motor wiring should be less than 66 feet, otherwise
wire separation of 4 inches may be required.
-10 to
66
95 95
221 221 221 276 331 419 419
30 35 43 43
100 100 100 125 150 190 190
2-7