GE Industrial Solutions AF-300C AC Drive - Manual (Page 51)

GEK-85718
AF-300C
SPEED POT
WATT
NOTE: LOCAL/REMOTE switch should be in the “REMOTE’ position Set Function Code 41 to
(No).
NOTE: JOG Decel follows the same slope as RUN Decel, except when JOG is commanded during
operation above the JOG frequency setting. Check the following Function Codes:
Function Code 23 = JOG Speed (Frequency) Setting.
Function Code 2A = JOG Accel Time Setting.
Function Code 26 = JOG Decel Time Setting.
Figure 4-22. REMOTE OPERATION WITH MAINTAINED CONTACTS AND JOG FUNCTION
WITH REVERSING CAPABILITY
9