GE Industrial Solutions AF-300C AC Drive User Manual
Page 47
Advertising
AF-300C
GEK-85718
IMPORTANT: The following CAUTIONS apply to Figures 4-l 6 through 4-26.
Other NOTES that apply to a specific Figure are shown on that Figure.
CAUTION:
If it is desired to use thermal interlocks, remove the jumper from between termi-
nals THR and CM and connect
Closed thermal interlock contacts in series between THR
and CM.
CAUTION:
If the “LOCAL/REMOTE’ switch on the Kevpad Panel is in the ‘LOCAL’ position,
START/STOP commands from remote are
NOTE: LOCAL/REMOTE switch should be in the ‘LOCAL’ position
DYNAMIC
DYNAMIC
BRAKE
BRAKE
THERMAL
THERMAL
SWITCHES
SWITCHES
Figure 4-18. OPERATION FROM KEYPAD
Figure 4-18. OPERATION FROM KEYPAD
4-l 5
Advertising