Setting broadcast storm thresholds – Asus GigaX2024SX User Manual
Page 102
Advertising
Figure 3-47. Displaying LACP Port Neighbors Information
CLI – The following example displays the LACP configuration settings and
operational state for the remote side of port channel 1.
Setting Broadcast Storm Thresholds
Broadcast storms may occur when a device on your network is malfunctioning, or
if application programs are not well designed or properly configured. If there is too
much broadcast traffic on your network, performance can be severely degraded
or everything can come to complete halt.
You can protect your network from broadcast storms by setting a threshold for
broadcast traffic. Any broadcast packets exceeding the specified threshold will
then be dropped.
3-77
Advertising