Asus GigaX2024SX User Manual
Page 93
Advertising
Command Attributes
• Member List (Current) – Shows configured trunks (Trunk ID, Unit, Port).
Stack unit. (Range: 1-8)
- Port – Port identifier. (Range: 1-26)
Web – Click Port, Trunk Membership. Enter a trunk ID of 1-4 in the Trunk field,
select any of the switch ports from the scroll-down port list, and click Add. After
you have completed adding ports to the member list, click Apply.
• New – Includes entry fields for creating new trunks.
- Trunk – Trunk identifier. (Range: 1-4)
- Unit –
Figure 3-42. Configuring Port Trunks
CLI – This example creates trunk 2 with ports 1 and 2. Just connect these ports to
two static trunk ports on another switch to form a trunk.
3-68
Advertising