Asus GigaX2024SX - Manual (Page 230)

show running-config
configuration information currently in use.
None
sage
• Use this command in conjunction with the show startup-config command to
compare the information in running memory to the information stored in
non-volatile memory.
• This command displays settings for key command modes. Each mode group is
separated by “!” symbols, and includes the configuration mode command, and
corresponding commands. This command displays the following information:
- MAC address for each switch in the stack
- SNTP server settings
- SNMP community strings
- Users (names, access levels, and encrypted passwords)
- Event log settings
- VLAN database (VLAN ID, name and state)
- VLAN configuration settings for each interface
- IP address configured for VLANs
- Layer 4 precedence settings
- Any configured settings for the console port and Telnet
Example
This command displays the
Default Setting
Command Mode
Privileged Exec
Command U
4-62