Asus GigaX2024SX - Manual (Page 320)

• Use the interface vlan command mode to define the port membership mode
and add or remove ports from a VLAN. The results of these commands are written
ntering the show
Example
to the running-configuration file, and you can display this file by e
running-config command.
Related Commands
show vlan (4-208)
vlan
This command configu
re the default settings
r delete a VLAN.
Syntax
vlan vlan-id [name vlan-name] media ethernet [state {active | suspend}]
no vlan vlan-id [name | state]
• vlan-id - ID of configured VLAN. (Range: 1-4094, no leading zeroes)
• name - Keyword to be followed by the VLAN name.
- vlan-name - ASCII string from 1 to 32 characters.
• media ethernet - Ethernet media type.
• state - Keyword to be followed by the VLAN state.
- active - VLAN is operational.
- suspend - VLAN is suspended. Suspended VLANs do not pass packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
• no vlan vlan-id deletes the VLAN.
• no vlan vlan-id name removes the VLAN name.
• no vlan vlan-id state returns the VLAN to the default state (i.e., active).
• You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name RD5. The
VLAN is activated by default.
res a VLAN. Use the no form to resto
o
Related Commands
show vlan (4-208)
4-152