Showing port statistics – Asus GigaX2024SX User Manual
Page 107
Figure 3-51 Output Rate Limit Port Configuration
CLI - This example sets the rate limit level for input and output traffic passing
through port 3.
Showing Port Statistics
You can display standard statistics on network traffic from the Interfaces Group
and Ethernet-like MIBs, as well as a detailed breakdown of traffic based on the
RMON MIB. Interfaces and Ethernet-like statistics display errors on the traffic
passing through each port. This information can be used to identify potential
problems with the switch (such as a faulty port or unusually heavy loading).
RMON statistics provide access to a broad range of statistics, including a total
count of differ
rt. All values
ce the last system reboot, and are shown as
counts per second. Statistics are refreshed every 60 seconds by default.
only be accessed using SNMP management
software such as HP OpenView.
ent frame types and sizes passing through each po
displayed have been accumulated sin
Note: RMON groups 2, 3 and 9 can
3-82