Asus GigaX2024SX - Manual (Page 361)

4-193
Related Commands
ip address (4-249)
ip default-gateway
This command establishes a static route between this switch and devices that
exist on another network segment. Use the no form to remove the static route.
Syntax
ip default-gateway gateway
no ip default-gateway
gateway - IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
A gateway must be defined if the management station is located in a different IP
segment.
Example
The following example defines a default gateway for this device:
Related Commands
show ip redirects (4-253)
show ip interface
This command displays the settings of an IP interface.
Default Setting
All interfaces
Command Mode
Privileged Exec
Example
Related Commands
show ip redirects (4-253)