Asus GigaX2024SX User Manual
Page 149
Advertising
The priority levels recommended in the IEEE 802.1p standard for vario
ns are shown in the following table. However, you can map the priority
us network
eues in any way that benefits application traffic for
applicatio
levels to the switch’s output qu
your own network.
ommand Attributes
. (Range: 0-7, where 7 is the highest priority)
put queue buffer. (Range: 0-3, where 3 is the highest CoS
iority, Traffic Classes. Assign priorities to the trafficclasses (i.e.,
output queues) for the selected interface, then click Apply.
C
• Priority – CoS value
Out
• Traffic Class* –
priority queue)
* CLI shows Queue ID.
Web – Click Pr
3-124
Advertising