Asus GigaX2024SX User Manual
Page 316
Advertising
Default Setting
auto
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• Specify a point-to-point link if the interface can only be connected to exactly one
other bridge, or a shared link if it can be connected to two or more bridges.
• When automatic detection is selected, the switch derives the link type from the
duplex mode. A full-duplex interface is considered a point-to-point link, while a
half-duplex interface is assumed to be on a shared link.
• RSTP only works on point-to-point links between two bridges. If you designate a
STP is forbidden.
port as a shared link, R
Example
4-148
Advertising