Asus GigaX2024SX - Manual (Page 207)

Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The SSH server supports up to four client sessions. The maximum number of
client sessions includes both current Telnet sessions and SSH sessions.
connection with the switch, and then negotiates with the client to
• The SSH server uses DSA or RSA for key exchange when the client first
establishes a
select either DES (56-bit) or 3DES (168-bit) for data encryption.
• You must generate the host key before enabling the SSH server.
Example
R
ip
sh
ip
Use this command to configure the timeout for the SSH server. Use the no form to
re
S
seconds
t
he timeout for client response during SSH negotiation.
C
T
the
cl
es
co
E
elated Commands
ssh crypto host-key generate (4-53)
ow ssh (4-56)
ssh timeout
store the default setting.
yntax
ip ssh timeout
no ip ssh timeou
seconds – T
(Range: 1-120)
Default Setting
10 seconds
Command Mode
Global Configuration
ommand Usage
he timeout specifies the interval the switch will wait for a response from
ient during the SSH negotiation phase. Once an SSH session has been
tablished, the timeout for user input is controlled by the exec-timeout
mmand for vty sessions.
xample
elated Commands
exec-timeout (4-19)
R
ip
T
mber of times the SSH server attempts to
re tting.
show ip ssh (4-56)
ssh authentication-retries
his command configure the nu
authenticate a user. Use the no form to restore the default se
4-39