Asus GigaX2024SX - Manual (Page 205)

The SSH server on this switch supports both password and public
authentication. If password authentication is specified by the SSH client, then the
password can be authenticated either locally or via a RADIUS or TACACS+
remote authentication server, as specified by the authentication login
on page 4-96. If public key authentication is specified by the client, then you must
configure authentication keys on both the client and the switch as described in the
following section. Note that regardless of whether you use public key or password key
command
steps:
1. the ip ssh crypto host-key generate
command to create a host public/private key pair.
t programs automatically
public key during the initial connection setup with the switch.
known hosts file on the management
he host public key in it. An entry for a public key in the known
499540186766925933394677505461732531367489083654
519417467729848654686157177393901647793559423035
authentication, you still have to generate authentication keys on the switch and
enable the SSH server.
To use the SSH server, complete these
Generate a Host Key Pair – Use
2.
import the host Provide Host Public Key to Clients – Many SSH clien
Otherwise, you need to manually create a
station and place t
hosts file would appear similar to the following example:
10.1.0.54102435568
7254150202455931998685443583616519999233297817660658309561082591
3212890233765468017262725714134287629413011961955667825956641048
6957427888146206
4-37