Asus GigaX2024SX - Manual (Page 50)

• RAM Level – Limits log messages saved to the switch’s temporary RAM
memory for all levels up to the specified level. For example, if level 7 is specified,
all messages from level 0 to level 7 will be logged to RAM. (Range:0-7,Default: 3)
ote: The Flash Level must be equal to or less than the RAM Level. N
Web – Click System, Log, System Logs. Specify System Log Status, then change
the level of messages to be logged to RAM and flash memory, then click Apply.
Figure 3-15. Configuring System Logging Messages
CLI – Enable system logging and then specify the level of messages to be logged
to RAM and flash memory. Use the show logging command to display the
current settings.
3-25