Asus GigaX2024SX - Manual (Page 221)

S
level
he system message levels (page 4-44). Messages sent
cted level down to level 0. (Range: 0-7; Default: 7)
D
C
ion
C
T
ents at this level or higher
w ample, using Level 7 will
vents from level 7 to level 0.)
yntax
logging sendmail level
level - One of t
include the sele
efault Setting
Level 7
ommand Mode
Global Configurat
ommand Usage
he specified level indicates an event threshold. All ev
ill be sent to the configured email recipients. (For ex
report all e
Example
This example will send email alerts for system errors from level 4 through 0.
logging sendmail source-email
This command sets the email address used for the “From” field in alert
messages.Use no form to delete the source-email.
Syntax
urce email address used in alert messages.
(Range: 0-41 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
You may use an symbolic email address that identifies the switch, or the address
of an administrator responsible for the switch.
Example
This example will set the source-email as [email protected].
logging sendmail source-email email-address
email-address - The so
logging sendmail destination-email
This command specifies the email recipients of alert messages. Use the no form
to remove a recipient.
Syntax
[no] logging sendmail destination-email email-address
email-address - The source email address used in alert messages.
(Range: 0-41 characters)
Default Setting
None
4-53