Asus GigaX2024SX - Manual (Page 176)

The configuration commands are organized into different modes:
• Global Configuration - These commands modify the system level configuration,
an
ame and snmp-server community.
• n - These commands are used for packet
fil
•
uch as
sp nd negotiation.
• lnet
configuration, and include command such as parity and databits.
• VLAN Configuration - Includes the command to create VLAN groups.
• Multiple Spanning Tree Configuration - These commands configure settings for
the selected multiple spanning tree instance.
To enter the Global Configuration mode, enter the command configure in
Privileged Exec mode. The system prompt will change to “Console(config)#”
which gives you access privilege to all Global Configuration commands.
d include commands such as hostn
Access Control List Configuratio
tering.
Interface Configuration - These commands modify the port configuration s
eed-duplex a
Line Configuration - These commands modify the console port and Te
To enter the other modes, at the configuration prompt type one of the following
commands. Use the exit or end command to return to the Privileged Exec mode.
For
mod
example, you can use the following commands to enter interface configuration
e, and then return to Privileged Exec mode
4-8