Asus GigaX2024SX - Manual (Page 240)

whichboot
This command displays which files were booted when the system powered up.
Syntax
Def
Com
Exa
This
ed by the whichboot command. See
e dir command for a description of the file information displayed
command.
whichboot [unit]
unit - Specifies the unit number.
ault Setting
None
mand Mode
Privileged Exec
mple
example shows the information display
the table under th
by this
boot system
p the system.
Syntax
boot system [unit:] {boot-rom| config | opcode}: filename
The type of file or image to set as a default includes:
• opcode - Run-time operation code.
name.
Def
Com
Com
• A colon (:) is required after the specified file type.
• If the file contains an error, it cannot be set as the default file.
pecified unit number.
This command specifies the image used to start u
• boot-rom - Boot ROM.
• config - Configuration file.
The colon (:) is required.
filename - Name of the configuration file or image
unit - Specifies the unit number.
ault Setting
None
mand Mode
Global Configuration
mand Usage
• A colon (:) is required after the s
Example
Related Commands
dir (4-92)
whichboot (4-94)
4-72