Asus GigaX2024SX User Manual
Page 51
Remote Logs Configuration
The Remote Logs page allows you to configure the logging of messages that are
rror
is
witch.
h as
3,
d, all
imum number of host IP addresses allowed is five.
• Host IP Address – Specifies a new server IP address to add to the Host IP List.
Web – Click System, Log, Remote Logs. To add an IP address to the Host IP List,
type the new IP address in the Host IP Address box, and then click Add. To delete
an IP address, click the entry in the Host IP List, and then click Remove.
se
or other management stations. You c
nt to syslog servers
an also limit the e
messages sent to only those messages below a specified level.
Command Attributes
r messages
• Remote Log Status – Enables/disables the logging of debug or erro
to the remote logging process. (Default: Enabled)
•
– Sets the facility type for remote logging of syslog messages.
Logging Facility
ty types specified by values of 16 to 23. The facility type
There are eight facili
used by the syslog server to dispatch log messages to an appropriate service.
RFC
The attribute specifies the facility type tag sent in syslog messages. (See
3164.) This type has no effect on the kind of messages reported by the s
H
used by the syslog server to proce
owever, it may be
ss messages, suc
sorting or storing messages in the corresponding database. (Range: 16-2
Default: 23)
• Logging Trap – Limits log messages that are sent to the remote syslog server
for all levels up to the specified level. For example, if level 3 is specifie
messages from level 0 to level 3 will be sent to the remote server.
(Range:0-7,Default: 3)
• Host IP List – Displays the list of remote server IP addresses that receive the
syslog messages. The max
3-26